"l ng c n 8um"

High Purity Soft 10um Conductive Copper Foil Rolls Description Of The Products : Brief Information : Copper Foil is rolled from pure copper ingots, the process including purifying copper ores, make into copper cathodes, ingoting, rolling, annealing, washing, testing, slitting and packing. Our copper ores are imported from South America, which were famous for their copper mining. 110-anneal (Electrolytic Tough Pitch or ETP) dead soft. Min 99.96% CU This is high quality copper

600mm Width Non Weldable High Purity Nickel Plated Copper Foil 1. Description Nickel has strong passivation ability due to its high stability in the air. It can form a very thin passivation film in the air which can resist atmospheric alkali and some acid corrosion. It makes nickel plated product with good chemical stability during working or under alkaline environment. Nickel plated product is not easy to change color and can be oxidized when the temperature is above 600℃

EMI Shielding Tin Plated Conductive Adhesive Copper Tape Product Description Tin-Plated Copper Foil Tape 1183 consists of a 1-ounce dead soft tin-plated copper foil backing and an electrically conductive, pressure-sensitive acrylic adhesive. This tape is supplied on a removable liner for easy handling and die-cutting. It has excellent solderability . Features: Dead soft 1-ounce (1.4-mil) copper foil backing for good shielding effectiveness, soldering and converting (slitting

Anti Oxidizing Width 600mm Single Side Tin Plated Copper Foil 1. Description Copper product is easy to oxidation when expose in the air and form verdigris. Verdigris can cause large resistance, poor conductivity and power transmission loss. Tin plated copper product due to tin itself characteristics can form stannic oxide thin films to prevent further oxidation. Tin can also form a similar film in halogens so that the tin plated copper product has well corrosion resistance

Heat Resistant Thickness 0.035mm Thermal Copper Foil Tape Product Description Item: Heat Resistant Tape Thermal Adhesive PCB LED Silicon Copper Foil ~ copper foil tapes uses copper foil as substrate and single sided coated with conductive acrylic adhesive. thermal conductivity copper foil tape ~ It can be divided into: self-adhesive copper foil, double side conductive copper foil tape ,single conductive copper foil tape.It has high temperature resistance ,strong adhesion

FPC FCCL FPCB 25μm 70μm Thin RA Copper Foil Dimension Range: Copper Foil thickness from 12~100µm can be supplied for FPC. Width can be made according to clients’ requirement up to 650mm. Applications: Flexible Copper Clad Laminate(FCCL), Fine Circuit FPC, LED coated crystal thin film, FPCB. Features: The material has higher extensibility, and has a high bending resistance and no crack. Table 1:FPC T2 high flex rolled copper foil properties (GB/T5230-2000,IPC-4562-2000) Item

8um 10um 12um Lithium Battery Pure Electrolytic Copper Foil Item T-Cu-08 T-Cu-10 T-Cu-12 width (mm) customized Thickness (um) 8 10 12 areal density (g/m2) 85-90 95-100 105-110 Purity(%) More than 99.9% Cu ≥99.9% Fe < 0.0010% Bi < 0.00020% Pb < 0.0005% Roller core inner diameter 76mm Width 200mm Tensile strength (MPa) ≥294 ≥300 ≥305 Normal elongation(%) 2.5 2.7 3.0 High temperature Tensile strength180℃(MPa) ≥147 ≥150 ≥153 High temperature elongation180℃(%) 2 2 2.5 Anti

Width 100mm High Precision ED Ultra Thin Copper Foil Produict Information : We can provide the specific single matte.double matte,and double shiny ED copper foil with the nominal thickness from 8um to 35um for the li-ion battery;the width is from 100mm to 1300mm.and the double shiny ED copper foil has the characteristics of the both sides. Features​ 1. the metal density nearing the copper theoretical density,very low surface profile,and high elongation and tensile strength; 2

Electrolytic 25um Thickness Red Copper Sheet Metal Roll Product Description This copper foil with 25 um thickness is the best candidate as substrate for growing Graphene. Copper strip is made of electrolytic copper and it goes through the processes of ingot, hot rolling, cold rolling, heat treatment, surface cleaning, cutting, finishing, and then packing. The material has excellent thermal and electrical conduction, flexible ductility and good corrosion resistance performance